Panasonic MC-V7375 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
__________
OPERATION - As you vacuum, the red indicS'
tor light will come on and stay on as long as the
sensor detects a high concentration of particles
passing through the cleaner.
The green light indicates that most of the
cieaning is complete.
The sensor switch aliows you to select the
sensitivity of the dirt sensor. The switch can
be set to HI or LO sensitivity.
Set the sensor sviritch to the HI position when:
• Cleaning bare floors.
• Cleaning carpet with low pile height.
Set the sensor switch to the LO position when:
• Cleaning heavily soiled areas.
• Cleaning carpet with deep pile.
• Cleaning new carpets.
Even with tine sensor switch in the LO position, the dirt sensor will detect carpet fuzz, especial
ly on new carpet, which may cause the red light to remain on longer than expected.
-
12
-