Pilot USA BluLink - Manual (Page 5)

5
Pairing with your phone and/or music device
What is pairing?
Bluetooth devices need to be “paired” with each other beforehand.
Once Bluetooth devices are paired, there is usually no need for
pairing again.
Before you can use BluLink to make a call or listen to music, it must
be paired with your Bluetooth enabled phone and/or music device.
Note: Once you have paired one device (i.e. cell phone) BluLink must
be turned off and back on before another device (i.e. iPod, music
player) can be paired.
To pair Blulink with your phone or music player
• On your phone, be sure the Bluetooth feature is turned on. For
more information, consult the user’s guide that came with your
phone.
• If using a Bluetooth dongle with your music player please consult
the user guide that came with it.
.
• With BluLink turned on, enter “pairing in process” mode by
pressing and holding button until BT indicator light begins
flashing Red/Blue.
• Have your phone search for Bluetooth devices. Once the phone
finds BluLink, pair with it. If your phone prompts you to enter a pass
code, enter 0000.
• Connect to BluLink.
Note: Passcode of this unit is fixed at “0000”, “1234”, or “8888”
Passcode may be called “Passkey”, “PIN code”, “PIN number”
or “Password”