Pilot USA BluLink - Manual (Page 6)

6
reconnecting previously paired devices
to Blulink
Once a device has been paired with BluLink, you can reestablish
a connection to the device by turning BluLink on and holding the
button until the blue light begins to flash.
Making and receiving Calls
You can make and receive phone calls even when not connected to
the aircraft intercom/radio. BluLink will provide “side-tone” in stand
alone mode.
Using the answer/reject/end call button
• Push button once to answer incoming phone call
• To reject the call hold button for about 4 seconds
• Push button once during call to end phone call
Using redial/ voice dial button
• Press button twice briefly to redial last number
• Press and hold button for about 4 seconds then speak the
name or command (only works if you have voice activation set up
in your phone)
Note: Some phones do not support all the features listed.
Using hold button during phone call
• Press and hold button for 2 seconds to put phone call on hold.
While in hold mode, you will not hear caller nor will they hear you.
• Push button once to release hold and resume phone
co nversation.