Cleveland Range Convotherm PC-Control - Manual (Page 2)

Operator's Manual
CONVOTHERM PC-HACCP TABLE OF CONTENTS
10 July 2006
Table of Contents
CONVOTHERM PC-HACCP and PC-Control
1. Introduction
1.1 General Information for CONVOTHERM PC-HACCP AND PC-CONTROL
1.2 System Requirements
2. CONVOTHERM PC-HACCP
2.1 Installing, Setting Up and Starting the software
2.1.1 Installing the CONVOTHERM HACCP Software on a PC
2.1.2 Setting Up the CONVOTHERM PC-HACCP Software
2.1.3 Setting the Network Address on the Combi Ovens
2.1.4 Log On and Off Combis in CONVOTHERM PC-HACCP
2.2 Automatic Storage of the Combi’s HACCP Data
2.2.1 Starting Automatic HACCP Documentation
2.2.2 Backing Up HACCP Data
2.3 Assigning HACCP Criteria to Programs (Recipes)
2.4 Making HACCP Criteria Is Fulfilled
2.4.1 Online Check
2.4.2 Checking HACCP Criteria
3. CONVOTHERM PC-Control
3.1 Software Installation, Setup, and Startup
3.2 Create a Cookbook on the PC
3.2.1 Multi-Step Programming
3.2.2 Modify an Existing Program
3.2.3 Additional Functions
3.2.4 Delta-T Cooking, Cook&Hold
3.3 Managing Recipes
3.3.1 Saving the Cookbook
3.3.2 Saving the Cookbook Under a Different Name
3.3.3 Displaying Different Program Lists
3.3.4 Print Lists
3.3.5 Sort Lists
3.3.6 Copy, Cut, Paste, or Delete a Program
3.4 Using the Cookbook
3.4.1 Sending Programs to a Combi
3.5 Other Functions
3.5.1 Changing the Pre-programmed Values in the PC-Control program
3.5.2 Disable or Enable Controls on a Combi
3.5.3 Send a Cookbook by e-Mail