Cleveland Range Convotherm PC-Control - Manual (Page 22)

Operating Instructions
3. CONVOTHERM PC-Control
page 8
10 July 2006 CONVOTHERM PC-Control
3.4 Using the Cookbook
3.4.1 Sending Programs to a Combi
• Click
Send.
• All the Combis registered in the CONVOTHERM PC-HACCP software are listed and
marked in the left-hand area of the window.
• A Program can be sent to a Combi by clicking on the Status icon.
1. Select transmission type:
• Send.
• Send + Start.
• Send + Autostart.
o When using Send + Autostart, set the time information in h.min or at
h.min.
2. Select the Program to be sent:
• All programs.
• Marked program(s) (see Tips+Tricks).
• Program number (specify number).
3. Start the transmission to the desired Combi by clicking Send.
4. After the transmission click Cancel to quit the window.