Tire-SafeGuard TTPM-WWC-SB - Manual

HCI Corporation TTPM-WWC-SB Installation 1
1. Parts List
Tractor:
1 Display Unit (TPM-DU)
2 Display Unit A/C Vent Clip (TPM-AC)
1 Display Unit Dash-Mounting Stand (TPM-DS)
1 Receiver Unit (TPM-RU)
3 2-Sided Adhesive Strip (TPM-AS)
1 Power Cord (TPM-PC)
6/8/10 Rim-Mounted Sensor-Transmitter (TPM-W2)
6/8/10 Sensor Mounting Band (TPM-MB)
1 Cabled Magnetic-Mounted Antenna (CBL-ANT8M-SMA)
1 Sensor Signal Booster (TPM-SB) with Power Cord
Trailer (Optional):
2/4/6/8 Rim-Mounted Sensor-Transmitter (TPM-W2)
2/4/6/8 Sensor Mounting Band (TPM-MB)
1 Sensor Signal Booster (TPM-SB) with Power Cord
Note: Can also support the optional spare tire sensors
2. System Installation
Tire-Safeguard tractor-trailer system installation involves the following steps:
1. Install the Receiver and Display in the tractor driver cab
2. Install the tractor Cabled Antennae and connect to the Receiver
3. Install the Sensors on the wheels
4. Install the Signal Booster(s)
2.1. Receiver and Display Installation
Tire Pressure Monitoring System
Model TTPM-WWC-SB
Installation Manual
a) Plug the Display data cord into the
data jack of the Receiver, and plug
the Power Cord (TPM-PC) into the
power jack of the Receiver.
b)
Receiver - Place the Receiver at
the desired location. Secure
Receiver with 2-Sided Adhesive
Strip (TPM-AS) or other user
preferred means.