Tire-SafeGuard TTPM-WWC-SB User Manual
Page 6
HCI Corporation
TTPM-WWC-SB Installation
6
2.4 Trailer Signal Booster Installation (Optional)
The weather-proof signal booster is installed in a horizontal orientation under the
chassis near the center of the trailer tire cluster. The signal booster needs 12~24
VDC to operate and is connected to the power source via a power cord, as
showed below.
3. Operation
After installation, the system operates automatically and continuously. Drive the
vehicle to check system performance. When the vehicle is in motion the
sensors send current tire information out frequently; when the vehicle is parked,
the information is still being sent – but at a slower rate of once every two hours.
Note:
The system is pre-programmed with the sensors in the package.
Therefore after installation the user does not need to perform any
setup procedure - the system should be working properly.