360 Systems DigiCart/EX - Manual (Page 27)

24BControl Panel
• 15
A PPROVED M EMORY C ARDS
The following memory cards have been tested and are known to work with DigiCart/EX.
• Kingston UltimateX 100X SDHC Class 10 SD10G2 - 4GB, 8GB and 16GB.
• Kingston SDHC Class 10 SD10V – 8 GB.
• Kingston Ultimate 100x SDHC Class 6 SD6G2 – 8 GB.
• Patriot LX Secure Digital High Capacity Class 10 – 8GB.
• PNY Professional High Speed SDHC Class 10 20MB/s – 8 GB.
• Sandisk Extreme SDHC UHS-1 Card Class 10 - 4GB, 8GB, 16GB.
• Sandisk SDHC Card Class 4 – 8 GB.
• Sony SDHC Class 10 SF-8NX/TQ2 - 8GB.
• Team Group Inc. SDHC High Performance Memory Card Class 10 – 4GB.
N OTES ON C ARD C OMPATIBILITY
Memory cards contain controller electronics that adhere to different revisions of industry standards.
Because of these differences, some cards will not mount automatically upon insertion. If you are
unable to find Approved cards, try to use cards that are SDHC compliant, and speed class 6 or
greater, preferably class 10. The higher speed is not required for operation, but it increases the
chances that the card uses newer industry standards.
Approved cards are known to mount automatically. Most cards will work well in the system even if
they require mounting with the Stop button, however a few have been seen to cause other issues.
See page 62 for notes on troubleshooting memory card operation.