360 Systems DigiCart/EX - Manual (Page 74)

62
• 32BMaintenance
T ROUBLESHOOTING M EMORY C ARD O PERATION
Incompatible cards may cause a considerable delay in the power up sequence. The display may stay
blank for an extended period and error messages may displayed during initialization. This will
normally just require additional waiting time, or the card can be removed until after the DigiCart/EX
has initialized.
In rare cases, incompatible cards can leave the card reader in an unresponsive state upon removal,
causing the next card inserted to fail to mount, even when Stop is pressed. Try reinserting the card or
inserting a different card. If this does not correct the problem power may need to be cycled to
restore the card reader’s operation.
Special Button Sequences
SPECIAL BUTTON SEQUENCE FUNCTIONS
Button Sequence Function
Utility+Power Switch Restore previous operating system version
Utility+Hot Key 1 Load new operating system to flash memory from
Memory Card or network drive.
Utility+Hot Key 2 Copy operating system from networked drive to
Memory Card.
Utility+Hot Key 3 Not assigned
Utility+Hot Key 4 Front panel LED test. All indicators should
illuminate together for 3 seconds.