ANKOM RF - Manual (Page 13)

Operator’s Manual
Rev F 8/29/14
pg. 13
Instrument Setup – Software
Computer Software Requirements
To run the GPM software, your computer must have the following programs.

Windows XP or later

Microsoft Excel 2003 or later

Internet Explorer 5.0 or later

Microsoft.Net

Windows Installer
If not already loaded, the ANKOM
RF
Gas Production System installation program will install:

Microsoft.Net

Windows Installer
You must run GPM software version 9.7.1 or greater if you are using Modules
with temperature sensors.
Instrument Software Installation
To install your GPM software, follow the steps below:
(1) Insert the GPM CD into your computer. After a few moments, the following window should open
showing the contents of the CD.
If the window above does not display automatically on your screen, then open
My Computer on your computer screen. (If the My Computer icon is not
already on your desktop, you can access it via the button in the
lower left corner of your desktop screen). With My Computer open, double-
click on your CD device icon to open the window above.
(2) Double-click the Setup icon in the window above. The following message box is displayed.