ANKOM RF - Manual (Page 27)

Operator’s Manual
Rev F 8/29/14
pg. 27
20 Cumulative Pressure Graph – When you click this tab you will see a line graph of the cumulative
pressure data that has been recorded to that point. A Module’s graph will only be displayed if its box in
the
Show Graph Line row is checked. An example of this screen is shown below.
The graph above represents a yeast study done with different amounts of yeast
and sugar in each bottle in ambient conditions without any temperature controls.
The Auto Graphing capability is meant to provide the user with a visual
indication of the data being recorded during the gas study. However, the graphs
themselves are NOT automatically stored after the study is complete.
To save the graphs from the Auto Graphing feature, you can either:
(1) right click while on the graph screen and select “Save Image As…”, or
(2) right click while on the graph screen and select “Copy”, or
(3) do a Print Screen.
Please note that all of the raw data is stored in MS-Excel format. Therefore, you
can always recreate a graph from the stored data by using the graphing feature
within MS-Excel.
Browse
Version: 9.8.3