Operator’s manual – ANKOM RF User Manual
Page 15
Operator’s Manual
Rev F 8/29/14
pg. 15
(6)
In the message box above, the
Destination Folder box shows the name of the folder path in which your
GPM software program will be stored. If the name is not what you want it to be, then type the name of
the folder, or click the
Browse button to go to the folder in which you would like to store this program.
(7)
In the message box above, click the
Install button. If there is already a version of the GPM software
installed on your computer, the following message box will be displayed. Otherwise, you will see the
installation begin, in which case you can skip step #8 and go right to step #9.
(8)
To load the updated GPM software, click the
OK button. The following message box is displayed.