Audio Damage Sequencer 1 - Manual (Page 8)

8
5. Tour of the Panel
We’ll start by looking at the knobs, buttons, and stuff on the panel. Here’s a drawing of the panel
for your reference if you happen to be reading this manual while away from your equipment:
5.1. Jacks
All of Sequencer 1’s jacks lie in a row across the bottom of the panel. The jacks in the group on
the left, circled with grey, are inputs; those in the group on the right are outputs.
5.1.1. Inputs
These three inputs let you synchronize Sequencer 1 with other modules, so that Sequencer 1
starts and stops upon their command and follows their tempo.
These inputs receive control voltages from other modules. You can assign these signals to
change various things in Sequencer 1, such as using an LFO to modulate the length of the
output gates.