Aviom A-16II - Manual (Page 30)

22 A-16ii P
ersonAl
M
ixer
U
ser
G
Uide
You can also exit Held Solo Mode by pressing the R
ecall
, G
ROup
, or M
ute
buttons.
Remember that the Personal Mixer can only enter Held Solo Mode from the normal Mix Mode. If you
currently have a channel temporarily soloed (the Solo LED is lit solid), you must exit the single channel Solo
Mode (by hitting another channel button or the S
OlO
button) before you can enter Held Solo Mode.
Mute a Channel
The method used for muting channels is similar to that used for the Solo function—first select the channel,
then perform an action. There are some differences, however.
You can mute as many channels as necessary for your application. •
Channels that are muted • can be saved as part of a mix Preset.
To mute a channel:
Select the channel first. •
Press the • M
ute
button.
The yellow LED in the channel button lights. •
Additional channels can be muted or unmuted by following the same procedure—first select the channel,
then press the M
ute
button.
Press the Mute button top toggle a channel’s mute state.