Aviom Aviom16/o-Y1 - Manual (Page 20)

13 Y1 A-N
et
C
Ard
U
ser
G
Uide
P N
ote
: Before switching the Y1 card to Test Mode, lower the volume on any connected A-Net
devices, amplifiers, powered speakers, etc., to avoid sudden volume changes and/or possible
hearing damage
To exit the Test Mode, a console restart is required. Power off the Yamaha mixing console. Reset the Y1
card DIP switches to the desired operational mode position, and then reboot the Yamaha console.
Aviom Mode
Yamaha consoles do not recognize Aviom mode (Switch 9 on and switch 10 off). Use MY16 mode as the
default setting for the Y1 card.
Stereo Link
Mode
1 2 3 4 5 6 7 8 9 10
Aviom mode is not supported by Yamaha.