Aviom Aviom16/o-Y1 - Manual (Page 22)

15 Y1 A-N
et
C
Ard
U
ser
G
Uide
Parallel A-Net Routing
Connecting A-Net devices in parallel involves the addition of an A-Net distributor. Any number of A-Net
distributors can be added, creating an infinite number of digital splits.
Using an A-Net Distributor
The diagram below shows a variety of A-Net compatible components connected in parallel to an A-Net
Distributor.
A-Net Distributor
A-Net In
From
A-Net Out
A-Net Out
A-Net In
Personal
Mixer
Personal
Mixer
Personal
Mixer
Personal
Mixer
Personal
Mixer
The A-Net Out from the distributor is connected to each A-Net compatible device with a Cat-5e cable. Removing one
A-Net device has no effect on the other A-Net outputs being used.
When configuring an A-Net system, Pro16 modules can be connected in any order; simply connect A-Net
Out to A-Net In as needed.