Aviom D800-Dante - Manual (Page 34)

26 D800
anD
D800-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
Dante Setup
The D800-Dante requires some additional configuration using Audinate’s Dante Controller
software when it is part of a Dante network.
Routing Channels
Any active audio resource in a Dante network may be routed to the D800-Dante. Routing channels
requires the Dante Controller software, available from the Audinate website. It can be run on either Mac or
PC computers. Complete documentation for the software is available from Audinate.
Dante Controller is essentially an X/Y grid that allows a channel from one device to be sent to another.
Devices that transmit are shown horizontally across the top of the grid; receiving devices are in the vertical
column along the side. Open any device’s Transmit or Receive panel by clicking the plus or minus sign (+/-)
next to its name.
The Dante Controller routing grid is used to assign channels to any device in the network.
Use the mouse to activate or deactivate a channel. A green check mark symbol indicates a valid connection.
Once channels are configured for your application, the Dante Controller software application can be