Aviom D800-Dante - Manual (Page 35)

27 D800
anD
D800-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
closed. Channel transmit/receive settings are stored within each Dante device until they are changed
using the Dante Controller software.
Device View
Opening the Device View for any Dante device in the network will display a tabbed view of additional
settings for the device. There is an overview of the device’s firmware, its transmit and receive settings, as
well as settings for the sample rate and redundancy.
Status Tab
Choose the Status tab of the Device View to display the current firmware and other manufacturer-related
information.
The status view for the D800-Dante displays its current firmware.
There are no user-configurable settings in the Status tab.