Aviom D800-Dante - Manual (Page 37)

29 D800
anD
D800-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
Network Config Tab
The settings for the D800-Dante’s Primary and Secondary ports are found within the Network Config Tab
of the Device View. Two settings are available in the drop-down menu. When set to S
wItched
, both ports
are identical; Dante devices can be daisy chained. When set to r
eduNdANt
, the Secondary port will serve
as a redundant copy of the data appearing at the Primary port. Note that using the Redundant setting
requires that the network be configured using a pair of gigabit switches.
Choose either Switched or Redundant from the drop-down menu.