Aviom SB4 - Manual (Page 18)

Connecting the SB4 to the D800
Once the console card’s A-Net streams are connected to the SB4 System Bridge, connect the SB4’s A-N
et
B
rIdge
output on its front panel to the A-N
et
B
rIdge
I
N
port located on the rear panel of the D800 A-Net
Distributor. The maximum Cat-5 cable distance from the SB4 to the D800 can be 400 feet (122 meters),
including all Cat-5 patch cables from the console cards to the SB4 rear panel.
Console Card 1
Console Card 2
Console Card 4
Console Card 3
From
A-Net Bridge
(front panel)
Connect the SB4 to the A-Net Bridge In port on the D800.
Finally, connect up to eight A360 Personal Mixers to the A-Net outputs on the D800 front panel to use
the Pro16e A-Net data. Remember you can customize the network channels that each A360 uses with the
A360 Channel Manager software.
11 SB4 S yStem
B
ridge
U
Ser
g
Uide