Aviom SB4 - Manual (Page 9)

Compatibility
The SB4 System Bridge can be used with:
• D800 A-Net Distributor
• D800 Dante™ A-Net Distributor *
• A-16II Personal Mixer
A-16R rack-mounted Personal Mixer
•
•
A-16D A-Net Distributor
A-16D Pro A-Net Distributor
•
•
AN-16/i Input Module
• AN-16/i v.2 Input Module
AV-M8
• Input Module
• AN-16/i-M Mic Input Module
• Y1 console interface card for use with Yamaha® consoles
• AN-16/o Output Module
• AV-P2 Output Module
Third-party Pro16 console interface cards
•
* Dante is a trademark of Audinate Pty. Ltd.
Compatibility with Pro64
Many Pro16 products can be connected to a Pro64® A-Net system with the addition of the ASI A-Net
Systems Interface. The ASI translates Pro64 A-Net data into Pro16 data and separates the 64-channel Pro64
stream into up to four 16-channel Pro16 outputs, depending on the Pro64 sample rate being used.
Only Pro16 devices that have an A-N
et
I
N
port such as A-Net Distributors, Personal Mixers, and output
modules are compatible with the ASI. Any of the four Pro16 A-Net outputs from an ASI A-Net Systems
Interface can be connected to the rear panel A-Net ports on the System Bridge.
2 SB4 S yStem
B
ridge
U
Ser
g
Uide