Aviom ASI - Manual (Page 16)

3 m
AiNtAiNiNg
Y
our
P
ro
64 P
roduct
Ventilation
Always allow adequate ventilation for devices mounted in equipment
racks. Avoid placing your Pro64 product directly above or below other rack‑
mounted devices that produce high levels of heat, such as power amplifiers.
Cleaning
Before cleaning a Pro64 product, turn off the power switch and unplug the
unit from the AC power source.
To clean the surface of the Pro64 product use a clean, soft lint‑free cloth that
has been slightly moistened with water only. For tougher dirt, use a cloth
slightly dampened with water or with a mild detergent. Always be sure to dry
the surface of the unit before proceeding with use.
When cleaning your Aviom products, never spray cleaners directly onto the
product surfaces. Instead, spray a small amount of the cleaning solution onto
a clean cloth first. Then use the dampened cloth to clean the product.
Never use solvents or abrasive cleaners on the finished surfaces of your
Aviom products.