AYRE AX-5 - Manual (Page 25)

In this case there is no default AyreLink code that
would select this input.
To address these issues, the setup menu allows each
named input to be associated with an AyreLink
identification code. Once you have selected the “
AL ”
menu item with the left-hand knob, simply select
the desired identification code (“
A ” to “ Z ”, or “ _ ” for
“none”) with the right-hand knob.
Do not assign any single identification
code to more than one input. Improper
operation may result.
The identification code transmitted by an
AyreLink source component will be found in the
owner’s manual for that unit.
Reset
It is possible to reset all of the setup mode
configuration items to their factory defaults by
using the reset function. After entering the
advanced setup mode, turn the left-hand knob to
“ RST ” and turn the right-hand knob to “ On ”. Press
the right-hand button to activate the "Reset"
function. All inputs will revert to “
OFF ”, all gain
offsets will be restored to zero, all Processor
Pass-Through settings will be restored to “
OF ”, and
all AyreLink codes will default to “ _ ”, for “none”.
The unit will then automatically enter the setup
mode so that the desired inputs may be activated.
23
ALA
.
.
ALZ
RST OF
RST On