Brookfield LFRA Texture Analyzer - Manual (Page 6)

Brookfield Engineering Labs., Inc. Page  Manual No. M/05-370-B0507
8) Allow the instrument to warm up for 10 minutes. Check calibration according to Section
III.8.
I. Safety Symbols and Precautions
Safety Symbols
The following explains safety symbols which may be found in this operating manual.
Indicates hazardous voltages may be present.
Refer to the manual for specific warning or caution information to avoid personal injury
or damage to the instrument.
Precautions
If this instrument is used in a manner not specified by the manufacturer, the protection
provided by the instrument may be impaired.
This instrument is not intended for use in a potentially hazardous environment.
In case of emergency, turn off the instrument and then disconnect the electrical cord
from the wall outlet.
The user should ensure that the substances placed under test do not release poisonous,
toxic or flammable gases or liquids at the temperatures which they are subjected to
during the testing.