Brookfield UL Adapter, Enhanced User Manual

Enhanced ul adapter

Advertising
background image

Brookfield Engineering Laboratories Inc.

-  -

Operating Instructions M06-084-A0507

B R O O K F I E L D E N G I N E E R I N G L A B O R ATO R I E S , I N C .

 Commerce Boulevard • Middleboro, MA 046 USA

ISO9001 CERTIFIED

T

E L

508-946-600 or 800-68-89 F

A X

5 0 8 - 9 4 6 - 6  6 

w w w . b r o o k f i e l d e n g i n e e r i n g . c o m

Boston • Chicago • London • Stuttgart • Guangzhou

Enhanced UL Adapter

Assembly & Operating Instructions

No. M06-084

The Enhanced UL Adapter, shown in Figure 1, is a kit consisting of a spindle with coupling nut attached, sample

chamber, mounting channel, and water jacket with mounting collar. It is available in two versions: (1) with type

304 stainless steel suitable for most general purpose applications; (2) with type 316 stainless steel for use with

corrosive/acidic applications. All versions are shipped with the water jacket (ULA-49EAY) mounted on the

sample chamber.
The type 304 s/s UL Adapter (Part No. ULA-EY) may be used either as an “open tube” or “closed tube” system.

In the “open tube” method, the water jacket (ULA-49EAY) must be removed, allowing measurement in a beaker

or other suitable vessel. In the “closed tube” method, the sample is poured into the sample chamber with tube end

cap installed, which may be temperature controlled by direct immersion into a water bath or with the use of the

water jacket connected to a circulating water bath. The 316 s/s UL Adapter (Part No. ULA-EZY) has a closed

sample chamber with solid bottom and cannot be used as an open tube configuration.

The Enhanced UL Adapter may be ordered without the water jacket (Part No ULA-E). Check your sales order to

verify that you have received the correct configuration for your Enhanced UL Adapter.

PIVOT CUP,

BR-3

(PART OF

LAB VISCOMETER)

ULA-E SPINDLE

WITH COUPLING NUT,

YULA-15E -304 SS

YULA-15EZ-316 SS

MOUNTING

CHANNEL,

ULA-10E

MOUNTING

SCREW,

HT-99

CLAMPING

KNOB,

ULA-05EY

TUBE END CAP,

ULA-34

(NOT REQ’D WITH ULA-31EYZ

SAMPLE CHAMBER)

SAMPLE CHAMBER,

ULA-31EY

(304 s/s, open tube)

ULA-31EYZ

(316s/s, closed tube)

CLAMPING

COLLAR,

ULA-02E

WATER JACKET with

MOUNTING COLLAR,

ULA-49EAY

CONICAL PORTION

OF SHAFT

PIN

Figure 1: Enhanced UL Adapter Assembly

Advertising