Checkline DT-326 - Manual (Page 22)

19
Delay Angle setting will decrease from 359° (Max) t o 0° (Min) value for counter clockwise. The setting s will
eventually go to 0°as when angle decreases from 359 °.
4.4.3 Units of Measure- Changing from FPM to Hz
Press and release the “SET” key to toggle between “FPM” to “Hz”.
Operation Expression
NOTE: Fraction values are rounded down.
4.4.4 ECO feature
Press and release the ECO key to reduce the brightness and conserve battery power. To return to original
brightness, press and release the ECO key again.
Operation Expression
Turn counter
clockwise
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
ms
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
ms
・・・・
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
ms
Go to delay time setting
Measuring unit “FPM” Measuring unit “Hz” Measuring unit “FPM”
SET
SET SET
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
PHASE+
Normal flashing mode ECO flashing mode
FLASH
ECO
ECO ECO
Return to normal
flashing mode
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○ ○ ○ ○
Press and release
Press and release