Checkline DT-326 User Manual
Page 30
27
4.5.4 Back light setting
Press “SET” key in Parameter mode to enable this mode.
Turning off the backlight will conserve battery power. For more information regarding the automatic
settings of the backlight, see section 4.6.
Press “PHASE +” key to turn on the backlight. Press “PHASE -” key to turn off the backlight
Button operation
Expression
4.6 Power-saving settings
4.6.1 LED flashing auto off
The LED flashing will automatically cease after 2 minutes of no keypad or dial operation when using
battery power. Flashing will resume with either a dial (rotation) movement or a keypad operation.
The auto LED shutoff is disabled in External trigger mode, while a signal is being received by the unit.
The LED flashing will automatically cease after 2 minutes of missing pulse input.
4.6.2 Auto Power off
The power automatically shut off after 5 minutes of no keypad or dial operation when in battery power.
To resume operation, press “POWER” key.
The auto Power shutoff is disabled in External trigger mode, while a signal is being received by the unit.
The power will automatically shut off after 2 minutes of missing pulse input.
4.6.3 LCD back light off
The LCD backlight will automatically shut off after 2 minutes of no keypad or dial operation when using
battery power. (With LCD parameter setting is “ON”)
The LCD backlight will light again with keypad or dial operation.
Press and release
OR
LCD backlight ON
LCD backlight OFF
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○
○
○
○
ms
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○
○
○
○
ms
Press and release
OR
LCD backlight OFF
LCD backlight ON
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○
○
○
○
ms
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○
○
○
○
ms
Turn clockwise
Turn counter
clockwise
Or
Or
PHASE+
PHASE
―
FLASH
PHASE-
FLASH
PHASE+