Checkline PM4 - Manual (Page 5)

 Electromatic Equipment Co., Inc
-12-
16.0 TECHNICAL DATA
Measuring depth
50 mm
Minimum material thickness 100 mm
Resolution 0,1% water content; 0,1°C; 0,3°F
Measuring range 1 to 25% water content
Angle temperature sensor 90°
Paper temperature 0°C to +80°C; 32°F to 176°F
Surrounding temperature 0°C to +50°C; 32°F to 122°F
(for measuring device)
Storage temperature -20°C to +60°C; 32°F to 122°F
(for measuring device)
Temperature compensation automatically
Memory for measured values approx. 10.000 values
Menu languages German, English, French, Italian, Spanish,
Russian
Power supply 4 pcs. 1,5 Volt AA Alkaline batteries
(for approx. 900 measurements)
Switch off time after approx. 4 minutes
Power consumption 60 mA (with display lighting)
Display 128 x 64 matrix display, with LED backlighting
Dimensions 182 x 75 x 54 mm (with rubber housing)
Weight 340g (incl. accu and rubber housing)
Protection class IP 40
Scope of supply humimeter PM4, accumulator, USB data
interface, contact-free temp. sensor, plastic
case, proof plate, protective rubber housing, user
manual
Options Mobile printer
 Electromatic Equipment Co., Inc
-5-
7.0 DESIGN OF THE DEVICE
8.0
DEVICE MAINTENANCE INSTRUCTIONS
To provide a long life of your device please do not expose it to strong mechanical
loads or heat e.g. dropping it or direct sunlight exposure.
The instrument is not rainproof. Keep it in dry areas. Clean the device only with a
dry cloth. For cleaning the steel clamps you can also use alcohol. Please do not
deform the steel clamps.
Do not touch the contact-free temperature sensor. Clean it by blowing, but do
not use compressed air.
If the device is not used for a longer period (2 months) or when the batteries are
empty, they should be removed to prevent a leakage of the battery acid.
name of
calibration curve
rolling menu
button
protective rubber
housing
(removable)
ON-OFF button
USB Socket
measuring value
temperature
steel clamp
(sensor area)
batteries slot
(backside)
changing the
calibration curve
measuring value
water content