Checkline P2 - Manual (Page 2)

ELECTROMATIC Equipment Co., Inc.
-2-
1.0 INTRODUCTION
1.1 Quality
information
We would like to inform you that your measuring device corresponds to the CE
norms EN50081 and EN50082. The function of your instrument has been
examined and calibrated before delivery.
1.2 Application
P2:
Mainly for very strong paper, packing paper, cardboard
P4: Mainly for paper used for offset printing
LM5: Mainly for leather
1.3
First setting into operation
Your measuring device should be supplied with a battery by the manufacturer. If
this is not the case, open the battery compartment and stick a 9 V block battery
or a charged accumulator onto the connecting contacts. Then put the battery in
the battery compartment. Make sure that the power cable does not get caught in
the lid. Press the power switch (ON) at the front of the instrument and the display
will go on. If this is not the case, check if the batteries are charged. If you hold
your measuring instrument in the air you will see a certain value on the display
depending on the switch position. Now you can compare this value to the rated
values according to tables on page 9. Furthermore it is advisable to check the
measuring device at the proof plane which is the bottom of the wooden case.
ELECTROMATIC Equipment Co., Inc.
-15-
NOTES