ChemoMetec NC-100 - Manual (Page 56)

10 Equipment and Accessories
40
Item Part no at
ChemoMetec A/S Description
current.
Mains Power cord See section below. A cord for mains supply of the
external power supply.
Dry, compressed air See section below Used for removal of dust from
the optical system of the
NucleoCounter
Dispenser 0.05-0.5 mL 911-0001 Dispenser for Reagent A100 or
Reagent B
Bottle Stand 929-0001 Holder for Reagent A100 and
Reagent B bottles
Thermo Printer PCNEOS-S2BN 939-0006 Optional thermo printer, using
thermo paper, for the
NucleoCounter
LTS paper for PCNEOS-S2BN 939-0012 5 roles of thermo paper
NucleoCounter Applic. Note
comp. 997-0003 Compendium with Application
Notes for the NucleoCounter
concept.
NucleoCounter Test Kit 912-0006 A test kit with 3 levels of bead
concentrations and a blank for
test of the NucleoCounter
10.2 Power supply
The NucleoCounter shall only be used with one of the following external power
supplies:
•
Power supply Class I, Proton Electronic Industrial Co. Ltd., model SPN-260-12,
input rated 100-240 Vac, 50-60Hz, 1.6 A. Output rated 12 Vdc, 4.3 A.
•
Power supply Class I, Powerbox Europe AB, model EBH 03 131, input rated
100-240 Vac, 47-63 Hz, 0.8A. Output rated 11-13 Vdc, 2.7 A.
•
Power supply Class II, Celetron USA Inc., model ZVC40LT12E, input rated 100-
240 Vac, 50-60Hz, 1.2 A. Output rated 12 Vdc, 3.3 A.
The detachable power supply cord set and appliance inlet of the external power
supply are considered as the disconnecting device.
Contact ChemoMetec A/S for information on order of a specific power supply listed
above.