COP-USA CD55HD-IP - Manual (Page 19)

Page 13 IP CAMERA USER MUANUAL
2. User can adjust Brightness, Contrast, Hue and saturation of the picture.
3. Select white balance mode.
4. .WDR, Sharpen, denoise, frequency and CVBS format are adjustable.
5. User can also enable the image mirror and image overturn function.
6. Click “Start Repair” button to repair bad point in the image.
7. Press the "Save" button to save the settings.
5.2.2 Video Stream
1. Enter into "Video configuration" "Video Stream" to see a interface as shown Fig
5-4:
Fig 5-4 Video Stream
2. Select the resolution of the single frame image at the "Resolution" pull down list.
3. Select the quantity of video per second at the "Frame rate" pull down list.
4. Select the data stream type at the "Bit rate type" pull down list.
5. Set the video quality at the "Video quality" pull down list.
6. Select alarm picture size.
7. Press the "Save" button to save the settings.
5.2.3 Time Stamp
Enter into "Video configuration""Time Stamp" to display the interface as shown
in Fig 5-5:
Fig 5-5 Time Stamp
1. Select Date Format to show in the live image.
Time stamp: time displayed in the live preview pictures. Four items can choose from:
top left, top right, bottom left and bottom right.
2. Press the "Save" button to save the settings.