COP-USA CD55HD-IP - Manual (Page 8)

Page 2 IP CAMERA USER MUANUAL
2 Installation
2.1 Install IP-CAM to Ethernet Network
The connection of digital video server is show below.
Figure 2-1 Connection
User can connect the PC and IP-CAMERA in accordance with above picture. Before
connecting, please connect external devices, and then connect the power.
The connection steps are as shown below:
Step 1: Connect IP-CAM firstly.
Step 2: Internet line connect to Internet transfer equipment or devices
Step 3: Connect power cable to a power outlet.
2.2 Install CMS
You can remotely monitor and manage the device by using client software or IE browser.
This chapter mainly introduces the installation of CMS. In respect of the operation and
monitor setting details, please refer to CMS user manual in CD.
Note: Prior to installing control center software in user’s computer, please make
sure all anti-virus softwares in the computer are closed so that CMS can install
correctly.

System requirement
Supported Operating System:
Operating system Comments
Windows XP Windows XP SP2 or most updated patch; Direct 9.0c or above
Windows Vista Windows Vista; Direct 10. c
Window 7 Window 7 Ultimate
Windows 2003 Windows 2003 serve or Directx 9.0c or above
Windows 2000 Windows 2000 SP4 or Directx 9.0c or above

Computer hardware requirement
Please make sure the software running well and the computer is compatible ：
Recommended PC Specification – 4 channels