COP-USA CD56NV-IR - Manual (Page 2)

I. Notes for Attention
1. Read the manual carefully before installing the product.
2. There are two input ways of power supply: DC12V (vehicle) and AC24V (normal pan/tilt). Detailed
connections refer to the description files.
3. There are sophisticated optical and electronic components inside the product. Avoid incorrect operation
methods such as heavy pressing or strong vibration during the course of transportation, store and installation
otherwise the product could be damaged.
4. Please do not dismount components inside the product to avoid occurrence of trouble. There is no part inside
the product, which needs repair by customer himself.
5. Observe all electric safety standards in application and adopt special power supply attached the product.
RS-485 control signal and video signal should be kept enough distance with the high voltage devices and
cables during the course of transmission, and take protection measures such as anti-lightning and surging etc.
if necessary.
6. Do not apply the product under the state exceeding limited temperature, humidity or specifications of power
supply.
7. Do not aim the camera at the sun or very bright object, aim or monitor bright and still object for a long time
whether the power supply of the camera is switched on or off.
8. Clean out dirt with special lens tissue if dust is stuck on the lens.
II. Description of Functions
This product is a high-tech monitor and controller which incorporates high definition color camera, universal
variable pan/tilt, infrared lighting, multi-functional decoder, character superimposing, alarm input/output into a
whole, reduces interconnections to a great extent among parts in the system and rises up the reliability of the
system. In addition it has advantages of easy installation and maintenance, beautiful appearance, lightweight and
flexible, simple operation etc.
1. Integrated Multi-Protocol Decoder
a. The built-in decoder integrates 16 kinds of communication protocols in maximum. The baud rate of
communication is adjustable. It has strong universality and is compatible with multiple common systems
only by simple setting on the dip-switch.
b. RS485 serial control: addresses of the pan/tilt 1 – 1023.
2. Integrated Panoramic Pan/Tilt
a. To rotate continuously in unlimited 360ºhorizontally with speed from 0.9 – 60 rad/s and from - 90º－90º
vertically with manual speed of 40 rad/s.
b. Smooth running at low speed with super lower noise. Images have no fluttering.
c. Panoramic monitor without black spot and the positioning accuracy can reach ±0.1°.
3. High Degree of Intelligence
a. Preset memory has as much as 128 positions. Data are kept in memory even power is failure.
b. Horizontal scan between two positions are supported. Scan speed can be altered and direction of pan can
be selected freely. The pan/tilt can make scan larger or smaller than 180° between any two positions with
adjustable speed.
c. Six groups of programmable patrol pattern are available with 16 preset positions each. The running speed
and retained time for each preset position are adjustable respectively.
d. Self-study function of pattern. The system can simulate the PTZ route of user’s operation within 40
１