COP-USA DVRC264-4CH_USB - Manual (Page 135)

Digital Video Recorder User Manual
6

Whether there are some signals which transmitted by other devices disturbing the Remote Controller or
not.
Notice: If the possibilities above are excluded, please contact with vendor to change the Remote Controller.
2.4.2 Facie of Remote Controller
The entire facie of the Remote Controller is shown in Fig2.3 Remote Controller.
Fig2.3 Remote Controller
All buttons on the Remote Controller describes as below table. You could use "A" button on the Remote Controller to
switch the input mode.
Button Name Description
POWER
Power Button
Press the button to shutdown the DVR.
REC
Record Button
If the DVR does not record, press the button to start recording. If the DVR is recording, press the button to stop
recording.
INFO
Information Button
Press the button to display state information of the DVR on the screen.