COP-USA DVRC264-4CH_USB - Manual (Page 48)

Digital Video Recorder User Manual
42
About network backup, please refer to 6.3.2 Remote Backup.
3.6 PTZ Control
Please connect speed domes to the DVR via RS485 first, referring to 2.3.1 Rear Panel Interface. And make sure the
speed dome has the protocols this DVR supports and set the parameters according to its manual.
STEP1
Press right mouse to show the control bar. Enter Menu---->System--->P.T.Z, see Fig 3.26.
Fig 3.26 PTZ Setup
STEP2 Set protocol, baudrate, address according to the parameters of the speed dome.
STEP3 Click Set button at right of Preset. Here users can set presets as Fig 3.27 Set Presets. Adjust the speed dome.
Select a preset and click Save to a preset. Users can set 16 presets totally.