COP-USA DVRHPEG-8 - Manual (Page 37)

Digital Video Recorder User Manual
STEP2 Enable Detection first. Set Device type.
STEP3 Enter Trigger configuration. Set alarm out, recording cameras and linked PTZ, referring to 3.3.4 Motion
Detection Recording STEP4-5
STEP4
Set Alarm in hold time. It is the interval time between the two adjacent efficient alarms. This is similar with Hold
time in MOTION configuration.
STEP5
Set Alarm out hold time and Buzzer hold time. Click OK to save settings
STEP6 Enter SCHEDULE configuration. Select Sensor and relative cameras to set, referring to 3.3.3 Timer Recording.
Notice: About preset and auto cruise, users can only select one at same time.
The actual post alarm record time equals Hold time in RECORD and Hold time in MOTION
3.4 Playback
This unit supports time search and event search. It displays full or 4 screens in playback. Click right mouse to show the
control bar, referring to Fig 4.1 Control Bar. Click Search, the window below will appear on screen.
Fig 3.13 Search Menu
31