COP-USA DVRHPEG-8 - Manual (Page 72)

Digital Video Recorder User Manual
66
STEP2 If a disk has never been formatted, Status will show “new”. Select hard disks, press Format button to begin.
STEP3 A security window will remind user that this will delete all data on HDD. Press OK to continue. A process will
display on the screen as below.
STEP4 It will return to the previous automatically after finished. And status will show “normal” after formatted.
Notice: All recorded files will
5.2 Up
be lost after formatted.
aler, and Make sure the firmware is corresponding with
sh to the computer. Copy the firmware to the flash. The extension of firmware is tar.
STEP2 Remove the USB flash to the DVR. Enter TOOLS configuration, referring to 4.2.10 Tools Configuration.
STEP3 Click Update. A window will appear, which reminds users that it will automatically load default settings after
update.
STEP4
Press OK to begin. The process bar will display on the screen during update.
date Firmware
Now it only supports USB update. Get the firmware from your de
the DVR. Users can check USB information in disk manager, please refer to Fig 5.1 Disk Manager.
STEP1 Plug an USB fla
STEP5 After finished, the unit needs restart.
Notice: If a “no device or no file” error appears, it is possible that the USB device is incompatible. Please change an USB flash.
Please be patient to wait. It will take 2-3 minutes to update. Moreover,, the updating file should be only one at one time.
5.3 Load Default Setup
The DVR has different setup blocks, like Basic, Record, Schedule, Motion etc. Users can choose any block to do default,
as Fig 5.2 Reset Blocks.