Eowave Ribbon - Manual (Page 11)

Presets parameters in synth mode
To select the synth mode, select Oscillator in the Audio Out menu.
The oscillator of the Ribbon is lofi digital 8 bit oscillator. Aliasing and
artefacts are part of the sound in the highier ranges.
Scale the Ribbon
In the stand-alone mode using the synth, you can set the range of the
Ribbon with either 4 octaves or 12 octaves (full scale) with half tones
mode or not. In the half tones modes, the first note played on the
Ribbon will be the closest half tone to the pressed position.
In the scale menu, choose between:
Full scale continuous (12 octaves)
Full scale halftone (12 octaves)
4 octaves continuous starting at the base note
4 octaves halftone starting at the base note
Oscillator waveform
The oscillator waveform can be chosen from saw, square, triangle, sine
and noise.
In the Waveform menu, choose a waveform.
Pad destination
This defines the effect type that the tactile pad will produce.
AM (amplitude modulation)
FM (frequency modulation)
 Ribbon direction
The Ribbon direction can be inversed with its maximu value on
the LED side or with its minimum value on the LED side.
This feature allows to hold the Ribbon with the tactile pad on the
right or on the left. It’s also very useful for left handed players.
Base note
Base note defines the base note. Click on the arrow and scroll to
choose your base note.