Use ribbon as a minisynth – Eowave Ribbon User Manual
Page 4
Use Ribbon as a MiniSynth
Basic connections to your sound system
Basic connections to your computer
In the example below, the Ribbon is used as an instrument connected
to your computer. The Ribbon is USB powered. Connect the Ribbon
to your computer with the USB cable delivered with the Ribbon.
The Ribbon has a real sound generation section with an internal lofi digital oscillator. It can be used as a mini synth by plugging it to a sound
system or thru your computer.
In the example below, the Ribbon is used as an instrument.
It can be powered with a 5V DC USB power supply or via usb. Plug
an audio cable from the audio out of the Ribbon to the audio in of
your loud speaker. Plug a mini USB to your computer or to a 5V DC
power supply to the power. Note that plugging more than 5V power
supply can destroy the unit. Cables and power supply can be found on
www.eowave.com/shop .
Once plugged, the Ribbon is automatically recognized as a MIDI
interface by your computer. It will appear under the name
« eowave ribbon ».