Eowave Ribbon - Manual (Page 2)

Cautions Care of the Ribbon
 Before using the Ribbon, make sure you have read the following instructions carefully, as well
as the instructions for use.
 Refer servicing to qualified service personal
 Do not try to repair the Ribbon. Please contact Eowave for technical support.
 Avoid all sharp object contact on the Ribbon.
 Do not use the Ribbon or store it under extreme temperature conditions or expose it to direct
sunlight, damp or dusty areas, areas prone to strong vibrations.
 Before you plug in the Ribbon, always check the voltage.
 Protect the Ribbon against violent shocks.
 Before using the Ribbon in a foreign country, check if the voltage is compatible.
 When the Ribbon is not used, disconnect the unit from its power supply.
 Never place heavy objects on the Ribbon.
 Never touch the Ribbon with wet hands when it is plugged in.
 Before moving the Ribbon, make sure the unit is disconnected from other devices.
 Before cleaning the Ribbon, make sure the unit is switched off and not plugged in.
 During lightning, unplug the Ribbon.
 The Ribbon is not a light saber. It is not made for fighting.
 Make sure your body is well isolated from the ground.
 The Ribbon surface is fragile. Only use your
finger to play on it. Avoid playing with sharp
objects, wood sticks, pens, chop sticks…
 Clean the Ribbon with a dry cloth. Never use
any detergent or Acetone on it or on the plexi
enclosure.
 Clean the tactile pad with a dry cloth. Never
use any detergent or Acetone on it or any
sharp objects.