Radio operations, 13 english – Clarion DB358RMP User Manual
Page 11
13
English
DB358RMP
Basic Operations
Adjusting telephone interrupt setting
1. Press the [D] button and press [ ]/[ ] button
to select "TEL-SW".
2. "TEL ON" or "TEL OFF" will be display after
2 seconds.
3. Turn the [ROTARY] knob clockwise to turn on
the Tel Interrupt or counterclockwise to turn
off the Tel Interrupt.
∗
During telephone interrupt, the display shows
"TEL".
This unit requires special wiring to mute the au-
dio signal automatically when a cellular telephone
rings in the car.
∗
This function is not compatible with all cellular tele-
phones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
∗
The factory default setting is “TEL OFF”.
Radio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS appears in the dis-
play.
∗
PS: Programme service name
2. To select a preset band, press the [BND] but-
ton, then select one of the preset bands such
as FM1, FM2, FM3 or AM. Every time the [BND]
button is pressed, the display will change as:
F1
Ж
Ж
Ж
Ж
Ж
F2
Ж
Ж
Ж
Ж
Ж
F3
Ж
Ж
Ж
Ж
Ж
AM
Ж
Ж
Ж
Ж
Ж
F1...
3. Press the [ ] or [ ] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in to
only broadcast stations with a good reception sen-
sitivity.
1. Press the [BND] button and select the desired
band (FM or AM (MW, LW)).
2. Tune into a station.
∗
If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
∗
If “TA” is lit in the display, TP stations are auto-
matically sought.
•••••
DX SEEK
Press the [ ] or [ ] button to automatically seek
a station.
When the [ ] button is pressed, the station is
sought in the direction of higher frequencies; if
the [ ] button is pressed, the station is sought in
the direction of lower frequencies.
∗
When seek tuning starts, “DX” appears in the dis-
play.
•••••
LOCAL SEEK
If you press and hold the [ ] or [ ] button for 1
second or longer, local seek tuning is carried out.
Broadcast stations with good reception sensitiv-
ity are selected.
∗
When local seeking starts, “LO” appears in the dis-
play.