Clarion DB358RMP - Manual (Page 15)

17
English
DB358RMP
RDS Operations
Adjusting AF
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
∗ The factory default setting is “ON”.
1. Press the [TA] button for 1 second or longer
and press [ ]/[ ] button to select "AF ON"
or "AF OFF".
2. Turning the [ROTARY] knob clockwise to "AF
ON"; turning it counterclockwise to "AF OFF".
∗ If the reception of the current broadcast station
deteriorates, “SEARCH” appears in the display
and the radio searches for the same programme
on another frequency.
Adjusting REG
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
∗ The factory default setting is “OFF”.
1. Press the [TA] button for 1 second or longer
and press [ ] /[ ] button to select "REG ON"
or "REG OFF".
2. Turning the [ROTARY] knob clockwise to "REG
ON"; turning it counterclockwise to "REG OFF".
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, turn the
[ROTARY] knob clockwise or counterclockwise to
set the volume to the desired level (0 to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
Emergency broadcast
If an emergency broadcast is received, all the func-
tion mode operations are stopped.
“ALARM” appears in the display and the emer-
gency broadcast can be heard.
•••••
Cancelling an emergency broadcast
If you press the [TA] button, emergency broad-
cast reception is cancelled.
Loading a CD
Insert a CD into the center of the CD insertion slot with
the labeled side facing up. “LOADING” appears in the
display, the CD enters into the slot and start playing.
CD Mode Operations
Notes:
• Do not put your hand, fingers, or foreign objects
into the CD insertion slot.
• If a CD has already been loaded, another CD can-
not be inserted. Do not insert another one force-
fully.
• Discs not bearing the mark cannot be played
with the unit. CD-ROMs cannot be played.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Listening to the disc already inserted
Press the [SRC] button to select the CD mode,
the CD will start playing.
Stopping (Pausing) playback
While the CD playing, pressing the [ ] button
will stop the CD and “PAUSE” indicate.
Press the [ ] button again to resume play-
back.
Ejecting the CD
Press the [ ] button, then the CD will be ejected.
Note:
• If the ejected CD is left as it is, it will be reloaded
after 15 seconds.
Top function
Press the [BND] button, then the CD will start play-
ing from the first song (track number 1).
∗ For MP3 mode, it will start playing from the first song
of current folder.