Clarion DB358RMP - Manual (Page 12)

14
English
DB358RMP
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired
band (FM or AM (MW/LW)).
∗ If “MANU” is not lit in the display, press and hold
the [BND] button for 1 second or longer. “MANU”
is lit in the display and manual tuning is now
available.
2. Tune into a station.
•••••
Quick Tuning:
Press and hold the [ ] or [ ] button for 1
second or longer to tune in a station.
•••••
Step Tuning:
Press the [ ] or [ ] button to manually tune
in a station.
Radio Operations
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding [DI-
RECT] button recalls the stored radio frequency
automatically.
1. Press the [BND] button and select the desired
band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT] buttons for
1 second or longer to store that station into pre-
set memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 1 second or longer to store the current sta-
tion into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a previ-
ously stored station remains unoverwritten at the
memory position.
Notes:
• The only FM band that can store the stations will
automatically be stored in FM3.
• When the auto store is performed, the station pre-
viously stored in the memory at that position is over-
written.
• If there are fewer than 6 stations with good recep-
tion, the stations previously stored at the remaining
[DIRECT] buttons are not overwritten.
• A station already stored in one of [DIRECT] but-
tons cannot be stored in another [DIRECT] buttons.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [ ] button.
2. When a desired station is tuned in, press the
[ ] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [ ] button for
1 second or longer, otherwise the auto store func-
tion is engaged and the unit starts storing stations.
1. Press the [BND] button and select the desired
band (FM or AM (MW/LW)).
2. Press and hold the [ ] button for 1 second
or longer. The stations with good reception are
stored automatically to the preset channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.