GEA Bock F18 - Manual (Page 21)

D
GB
F
E
21
96246-07.2014-DGbRu
6| Maintenance
6.6 Decommissioning
6.5 Excerpt from the lubricant table
The oil grade filled as standard in the factory is noted on the
name plate. This oil grade should be
used preferably. Alternatives to this are listed in the following excerpt from our lubricant table.
Refrigerant Bock series oil grades Recommended alternatives
HFKW
(e.g.
R134a,
R404A/R507, R407C)
Fuchs Reniso Triton SE 55
FUCHS Reniso Triton SEZ 32
ICI Emkarate RL 32 H, S
MOBIL Arctic EAL 32
SHELL Clavus R 32
HFCKW
(e.g.
R22) Fuchs Reniso SP 46
FUCHS Reniso, z.B. KM, HP, SP 32
SHELL Clavus SD 22-12
TEXACO Capella WF 46
Information on further suitable oils on request.
Close the shut-off valves on the compressor. Drain the refrigerant (it must not be discharged into the
environment) and dispose of it according to the regulations. When the compressor is depressurised,
undo the fastening screws of the shut-off valves. Remove the compressor using an appropriate hoist.
Dispose of the oil inside in accordance with the applicable national regulations.