Hardy Advantage Weigh Modules LPB - Manual (Page 19)

OPERATION AND INSTALLATION MANUAL
Page 13
hole diameters and center distances. If you do not
have Internet access, contact your local Hardy Dealer
for a copy of the drawing.
Installing the
Base Plate Step 1. Make sure that the concrete foundation is
level.
Step 2. To assist in the installation of the anchor
bolts we recommend creating a template
using the thru hole diameters of the top
plate mounting dimensions. For drilling
dimensions, see the drawings accessed
from the Products page on the Hardy Pro-
cess Solutions web site. Note that the holes
for top and bottom are in direct alignment,
but the thickness of the top and bottom
plates differ.
FIG. 16: ANCHOR BOLTS EXAMPLE
Fig. 16 and Table 1 provide side dimensions and hole-
diameters only.