Intertape Polymer Group (IPG) TWA 1000-M - Manual (Page 25)

TWA 1000-M (U9701) UDM 9701
25
P
REVENTIVE
M
AINTENANCE
W ARNING ! T HE KNIFE CONTAINED IN THIS W ATER A CTIVATED T APER IS EXTREMELY SHARP . U SE
CAUTION WHEN THREADING THE TAPE TO AVOID PERSONNEL INJURY .
Cleaning The Cutter Blade
Figure 10-4
1. Remove the water bottle
2. Remove the brush pot assembly
3. Remove the upper guide plate
4. Advance the pull handle slightly to lift the
cutter blade
5. While the retaining the handle position,
clean the blade on both sides using
warm water and a mild detergent
6. Clean the striker plate using warm water
and a mild detergent
7. Replace the Upper guide plate, brush
pot assembly and water bottle
Figure 10-5
Back Side Of
Cutter Blade
Cutter Blade
Striker Plate