KEYENCE IG Series User Manual
Ig series, User’s manual
Advertising
Table of contents
Document Outline
- Introduction
- Safety Information for IG series
- Table of Contents
- 1 Before Use
- 2 Installation and Connection
- 3
Basic Operations
- 3-1 Operation When the Power is Turned on for the First Time
- 3-2 Operations on the Main Screens
- 3-3 Optical Axis Alignment
- 3-4 Registering the Standard Waveform (Gain adjustment)
- 3-5 Initial Reset (Initialize)
- 3-6 Setting the Tolerance Setting Value
- 3-7 Zero Shift Function (Shifting the Internal Measurement Value (R.V.))
- 3-8 Bank Function (Registering Multiple Tolerance Setting Values)
- 3-9 Key Lock Function
- 3-10 Selecting the Display Unit
- 4
Setting Various Functions
- 4-1 Setting Operations
- 4-2
Basic Settings and Advanced Settings
- List of Setting Items
- Setting Screen
- 1. Measurement mode
- 2. Measurement direction
- 3. Average number of times (Response time)
- 4. Output mode
- 5. Hold function
- 6. Timing input
- 7. Delay timer
- 8. Hysteresis
- 9. Edge check function
- 10. Analog output scaling
- 11. External input
- 12. Saving the standard waveform function
- 13. Saving zero shift value function
- 14. Interference prevention function (only for IG-1000/1500)
- 15. Display Digit
- 16. Power saving indication
- 17. Position monitor
- 18. Display Color
- 4-3 Setting the Measurement Sensitivity
- 4-4 Calculation Function
- 4-5 Calibration Function
- 5 Specifications
- 6 IG Configuration Software (IG-H1)
- Appendix