KEYENCE IG Series - Manual (Page 86)

4-2 Basic Settings and Advanced Settings
4-28
4
Setting V
a
ri
o
us
F
u
nct
ion
s
IG-E
Timing chart
„ Delay timer off
The delay timer is not used.
„ ON-delay timer
Time required to change the GO judgment output operation from OFF to ON is delayed for
specified time set on the timer. Also, time required to change the HIGH judgment output
and LOW judgment output operations from ON to OFF is delayed.
Reference • The following are the timing charts when the output mode of judgment output
is Normally Open (default value). ON/OFF is reversed for Normally Close.
"4. Output mode" (page 4-19)
• The hysteresis is not taken into account in the following timing charts. Note
that the hysteresis affects the ON/OFF timing of the actual judgment output.
"8. Hysteresis" (page 4-30)
Time
Judgment value (P.V.)
HIGH side setting value
LOW side setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output
Time
Timer value
Judgment value (P.V.)
HIGH side setting value
LOW side setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output