Panasonic UF-490 - Manual (Page 34)

Customizing Your Machine
34
Fax Parameter Table
19 OGM LENGTH
(TAM I/F)
1 1 sec. Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect SILENCE
until the time setting has lapsed.
(Default = 20 sec.)
--- ---
60 60 sec.
20 SILENT DETECTION
(TAM I/F)
1 Invalid Selecting the Silent Detection Mode.
2 Valid
22 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the
recording paper is jammed.
2 Valid
23 RECORDING PAPER
SIZE
1 A4 Setting the recording paper size installed in your machine.
2 Letter
3 Legal
24 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
2 Auto
25 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print
reduction is selected on Fax Parameter No. 24.
---- ----
100 100%
26 POLLING
PASSWORD
(----) Setting a 4-digit password for secured polling. (See page
68)
28 STAMP AT MEM. XMT 1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel)
2 Valid
30 DRD SERVICE 1 Invalid Selecting whether or not the machine is available "DRD
Service". If this parameter is set to "Valid", your machine
detects the specified ring pattern only to receive a
document automatically.
2 Valid
32 COPY REDUCTION 1 Manual Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Manual: The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto : The machine will automatically determine the
reduction ratio according to the length of the
original document.
2 Auto
No. Parameter
Setting
Number
Setting Comments