Ii. general safety – Kistler-Morse KM Load Stand II User Manual
Page 6
97-1100-01 Rev. H
2
www.kistlermorse.com
II. gENEraL SafETy
authoriZeD PerSonneL
All instructions described in the document must be performed by authorized and qualified service personnel
only. Before installing the unit, please read these instructions and familiarize yourself with the requirements and
functions of the device. The required personal protective equipment must always be worn when servicing this
device.
uSe
The device is solely intended for use as described in this manual. Reliable operation is ensured only if the
instrument is used according to the specifications described in this document. For safety and warranty reasons,
use of accessory equipment not recommended by the manufacturer or modification of this device is explicitly
forbidden. All servicing of this equipment must be performed by qualified service personnel only. This device
should be mounted in locations where it will not be subject to tampering by unauthorized personnel.
MiSuSe
Improper use or installation of this device may cause the following:
• Personal injury or harm
• Application specific hazards such as vessel overfill
• Damage to the device or system
If any questions or problems arise during installation of this equipment, please contact Customer Support at
800-426-9010.